PVC chamfer beads are very practical products in formwork engineering. Since the formwork is made of wood, it is difficult to make the corners of the walls and columns into slopes or arcs. However, with the help of PVC chamfer beads, we can nail them into the formwork and easily make the corners of walls and columns into inclined or arc surfaces.

PVC chamfer beads can be used to assist formwork engineering, so that buildings can easily obtain inclined or arc-shaped corners. When carrying out formwork engineering, construction personnel only need to fix the PVC chamfer beads in the formwork, and adjust its shape into a slope or arc surface according to requirements, which will help them control the shape of the corner more precisely, so as to realize Various special design effects.

Magnetic chamfer bead is a very practical product in formwork engineering. Because iron formwork is difficult to make wall corners and column angles into slopes or arc surfaces, however, with the help of magnetic chamfer bead, we can easily absorb them in the formwork, and the wall corners and column angles Make a bevel or arc surface.

The use ofmagnetic chamfer bead can assist formwork engineering, so that buildings can easily obtain inclined or arc-shaped corners. When carrying out the formwork project, the construction personnel only need to absorb the magnetic chamfer beads in the formwork and adjust its position according to the needs, which will help them control the shape of the corner more precisely, so as to realize various special designs effect.

PVC triangular fillet is a very practical product in formwork engineering. Because the formwork is made of wood, it is difficult to make the corners of the walls and columns into slopes. However, with the help of the PVC triangular fillet, we can easily nail it into the formwork, and make the corners of the walls and columns beveled.

The use of PVC triangular fillet can assist formwork engineering, so that buildings can easily obtain inclined or arc-shaped corners. When carrying out formwork engineering, construction personnel only need to fix the PVC triangular fillet in the formwork, and adjust its shape into an inclined plane or a circular arc surface according to requirements.

Steel bar sleeve is a very practical product in formwork engineering. When carrying out formwork engineering, we usually need to use steel bars to fix the formwork to ensure the stability of the formwork. However, the traditional method is that the steel bars cannot be taken out after grouting, which will lead to the failure of the steel bars to be used again and increase the construction cost.

With the help of steel bar sleeves, we can easily solve this problem. These products slip over the rebar to allow easy removal of the rebar after grouting, making it reusable. This not only saves raw material costs, but also improves construction efficiency, making the entire formwork project more economical and environmentally friendly.

The main function of the steel bar sleeve is to protect the steel bars fixed by the formwork after grouting and ensure the integrity and stability of the steel bars. At the same time, it also allows the steel bars to be easily taken out after grouting, thereby realizing the reuse of the steel bars. This not only has a positive impact on the construction process, but also on environmental protection.

Product description:
When using a PVC tie rod sleeve and after removing the sleeve, there may be holes left in the wall. This product can be used to plug those holes, making the overall appearance more aesthetic.

Feature:
Used for filling wall holes, enabling the project to simultaneously save costs and enhance aesthetics.